SCA stainless steel box 200x300x120mm

SCA stainless steel AISI304 box 200x300x120mm
Equipment:
Base, cover with gasket, set of screws for screwing the cover and the mounting plate.
Accessories:
Wall brackets, mounting plate, DIN rail brackets, cover screws.
Construction:
Stainless steel ≠ 1.2mm.
Monolithic body, bent and welded in a continuous system. M5 full sleeves enable wall mounting without any mechanical treatments.
Cover:
Stainless steel ≠ 1.2mm.
Cover fixing screws with a cross head, equipped with a system preventing accidental falling out (we deliver screws with other heads on request).
Polyurethane gasket poured around the perimeter, temperature range -40 ° C ÷ + 90 ° C.
Materials:
Stainless steel: AISI 304 (EN 1.4301). Made of AISI 316 (EN 1.4404) on request.
Finish: Scotch-Brite.
Certificates:
EN62208, EN60529, EN62262
UL508A - CSA C22.2 n °. 14-13
NEMA Type 1,12,4,4X

Design details of SCA stainless steel box:



The rear fasteners allow the box to be properly mounted on rails (or directly on the devices) without additional mechanical treatments that could weaken the high degree of protection IP66.

The bolt hooking system is located on the outside of the gasket edge, ensuring tightness. The cover fixing screws are equipped with an anti-fall system.

The connection of the cover to the base of the SC electric box has been designed to obtain maximum compression efficiency of the gasket between the box and the cover. In addition, the connection system has been designed to prevent accidental cutting of the gasket in the event of improper tightening of the cover bolts.

Internal spacers have been developed to allow easy installation of accessories.

Possible modifications of stainless steel casings for the customer's design at the production stage.

Please contact us by e-mail at the following address:inoxbox@inoxbox.pl

On the top right or below (depending on the device) there are accessories dedicated to stainless steel boxesSCA.